Nasho23
X-TRAIL NEWBIE
Date Registered: 07-2014
TOTAL POSTS: 22
|
|
|
|
2012 T31 Xtrail Remote Fob not working
Hello, I thought I had replied to Jalalski Post about reprogramming the Remote fob for Xtrails, but have received no reply and cannot find the Reply, so I will Post here, hoping for an answer and a Fix.
Recently one of my two Remote Fobs stopped working. I checked the Battery which was OK. I took it to my Local Locksmith and asked him to test it for Signal Output. The result was, yes, it was putting out a Signal but not showing any Frequency, similar to the other Remote, which works fine. With this in mind I thought the Remote only needs to be Re Programmed to receive a new ID. I read with interest the Procedure you have listed (Courtesy Parts) an gave it a go. Attempts at inserting the Key as instructed, failed to get the Hazard Lights to Flash - Nothing happened.
I now ask; Is this procedure for both T31 & T30 and is it for these later Intelligent System Remotes, which have no Identification information on the back, OR, is there a later Procedure for Vehicles 2012 and later???
I hope you can assist with this, as the Dealer wants $143 to Program the Remote Fob, plus a Discounted $177 for a New Remote, if is Kaput.
|
6/Jun/2016, 11:12 am
|
|
Nasho23
X-TRAIL NEWBIE
Date Registered: 07-2014
TOTAL POSTS: 22
|
|
|
|
Re: 2012 T31 Xtrail Remote Fob not working
quote: Hello, I thought I had replied to Jalalski Post about reprogramming the Remote fob for Xtrails, but have received no reply and cannot find the Reply, so I will Post here, hoping for an answer and a Fix.
Recently one of my two Remote Fobs stopped working. I checked the Battery which was OK. I took it to my Local Locksmith and asked him to test it for Signal Output. The result was, yes, it was putting out a Signal but not showing any Frequency, similar to the other Remote, which works fine. With this in mind I thought the Remote only needs to be Re Programmed to receive a new ID. I read with interest the Procedure you have listed (Courtesy Parts) an gave it a go. Attempts at inserting the Key as instructed, failed to get the Hazard Lights to Flash - Nothing happened.
I now ask; Is this procedure for both T31 & T30 and is it for these later Intelligent System Remotes, which have no Identification information on the back, OR, is there a later Procedure for Vehicles 2012 and later???
I hope you can assist with this, as the Dealer wants $143 to Program the Remote Fob, plus a Discounted $177 for a New Remote, if is Kaput.
Hello Jajajski, Can you please respond to my Post, as it was the Guide that you published that I am having issues with.
Thank You.
|
9/Jun/2016, 10:59 am
|
|
Revhead Kev
Date Registered: 10-2006
Location: Mona Vale, Sydney, AUSTRALIA
TOTAL POSTS: 6355
|
|
|
|
Re: 2012 T31 Xtrail Remote Fob not working
If you used the site search for "reprogram remote" you would have found his reply in this thread and his answer that the programming guide was ONLY FOR T30 remotes and that he has not found a guide for the T31 remote such as you have.
--- Kev X450(c) T30 Guru
03 Titanium Ti T30 Series 1 **MODIFIED**
My Blog
My CarPC Worklog
|
9/Jun/2016, 10:55 pm
|
|
Revhead Kev
Date Registered: 10-2006
Location: Mona Vale, Sydney, AUSTRALIA
TOTAL POSTS: 6355
|
|
|
|
Re: 2012 T31 Xtrail Remote Fob not working
If you do some extensive google/bing searching who knows you might find something from the UK or another site on how to do it and then you can report it back to us for the rest of our T31 members.
--- Kev X450(c) T30 Guru
03 Titanium Ti T30 Series 1 **MODIFIED**
My Blog
My CarPC Worklog
|
11/Jun/2016, 9:15 am
|
|