jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re:
Can't see how this process will be any different to the existing guide covering the pads replacement for the T30 exy.
Also, refer to THIS thread for T31 brake pads part numbers...etc
Last edited by jalalski, 14/Sep/2015, 8:57 pm
|
14/Sep/2015, 8:56 pm
|
|
Martynf65
Date Registered: 10-2015
Location: Wiltshire, South west UK
TOTAL POSTS: 32
|
|
|
|
Re:
If they are between the back of the brake pad and the caliper piston? then they are anti rattle /anti squeal shims. I would of fitted them to the new pads for sure. Unusual to see two back to back mind...not done my pads so cannot say if mine has 1 or 2 behind each piston side pad, maybe another owner can confirm?
Sometimes.... new pads have the anti rattle / squeal shims built into the back of the new pads, do you recall seeing anything? you normally peel off a protective 'sticker' on the back of the pad as its coated with a compound to prevent squeal.
Martyn
--- X-4406 03 2.0 sport
2.5ltr dash, Satin black powder coated wheels BFG AT KO2, Mudtraxs ramps, 4m bridle+ 20m recovery strap, compressor, high tensile front recovery points, CB in dash cubby, SVE s/wheel + fridge in the boot
|
27/Oct/2015, 6:02 pm
|
|