Re: How to Reset/Reprogram your ECU - T30 Series I & II As mine is a T30 2.0 litre from Japan the fuses didn't match this layout, I found this appeared to work to reset mine
To carry out the reset carry out the following
Turn ignition on so all dash lights come on.
Wait 3 seconds
PUMP accelerator pedal 5 times within 5 seconds....
with foot now OFF accelerator wait 7 seconds...
After 7 seconds press and hold down accelerator pedal for 10 seconds...
After 10 seconds the Engine Management Light will start to flash, at this point remove foot from accelerator.
The ECU is now in diagnostic mode, so let the EML flash for a bit. the press and hold the accelerator pedal down for more than 10 seconds..this will then reset ECU and fuel pump etc......and put them into learning mode.