Date Registered: 04-2014 Location: Central Coast NSW TOTAL POSTS:91
|
Replacing rear power outlet with a double outlet Hi guys.
I have just purchased a USB and power outlet for the exy, the intention is to remove the single outlet from the rear compartment and fit this so I can run the rear car-cam and still have an outlet for the wayco cooler.
I have struck my first problem, How the hell do I get access to the PowerPoint?
I have pulled virtually everything Im game to pull off, but I'm obviously missing something.
Has anyone got pictures or instructions for said access? If so could you please post these so I can get started.
Thanking you in advance.
--- 2010 T31 Series III 2.5 White Automatic CVT
A vehicles real purpose in life is to tow a boat
Guy Fawkes is my hero (Born 13/4/1570, Murdered 5/11/1605)
He was only trying to do the right thing
Re: Hey mate. I am on the C.Coast too! You have to take a lot of the trip off around the boot to get that panel off, but it does just pull off and with it will come the 12v accessory plug.
Date Registered: 04-2014 Location: Central Coast NSW TOTAL POSTS:91
|
Re: I have fitted the plug, it was a bit of a hassle.
Everything and I mena everything comes out of the boot, even the spare tyre.
The luggage hold downs were a little confusing at first,but once the trick was worked out (10 mm bolt under a plastic cover) The whole side was able to be moved to access the powerpoint.
It was just drilling a hole in the appropriate place and linking the wires to the existing powerpoint.
Here it is all fitted.
This was about the only place where the depth behind the plastic was deep enought to not touch the connectors, but its ok by me.
--- 2010 T31 Series III 2.5 White Automatic CVT
A vehicles real purpose in life is to tow a boat
Guy Fawkes is my hero (Born 13/4/1570, Murdered 5/11/1605)
He was only trying to do the right thing