Date Registered: 05-2014 Location: Canberra TOTAL POSTS:14
Towing with T31 - Right Indicator Problem Hi,
We've recently bought a diesel T31 TS (2010) and also recently bought a new trailer.
When we bought the trailer we towed it home with our Falcon which we no longer have, and there were no issues.
Now that we sold the Falcon and bought the T31 I notice an intermittent fault when using the right indicator. The indicator will flash once and then not flash at all. I turn it off and then on again and most of the time it will flash normally.
No globes are out on either the car or the trailer.
Has anyone else had this issue and if so do you know what causes it?
Date Registered: 01-2005 Location: sunnybank hills TOTAL POSTS:109
Re: Towing with T31 - Right Indicator Problem i to have this problem i to a caravan and thought the connection on the caravan was no good so replaced it . i put right hand blinker on it worked fine, but when driving the right blinker would not work. if i put the blinker on then off then on again it would work. i have tried and tested everything to no solution, i just keep turning it on and off
Date Registered: 09-2014 Location: Brunswick WA TOTAL POSTS:29
Re: Towing with T31 - Right Indicator Problem I have had the exact same problem. I turned out to be a single strand of copper pushing through a join at my trailer plug. I've brought my socket into the back of the car. Its on a lead that stays inside the car jack void when not in use. I did this after my bumper was replaced after someone massaged the original one. The issue was were I had added extra length to the tail from the loom. I'd suggest checking to see if there is anywhere under the car that might be rubbing on the cables to the trailer socket. Hope this helps your problem.