Date Registered: 02-2004 Location: SUTHERLAND, SYDNEY TOTAL POSTS:29094
Re: That's exactly right, the ECU will adjust itself with the K&N filter, but if you don't want to wait 2-3 days the quick ECU re-set is the way to go and you won't notice anything after the re-set procedure.
Date Registered: 03-2008 Location: Mullingar, Ireland TOTAL POSTS:35
Re: ECU reset on T31 But what if you don't have an ECCS fuse???? I fitted a new boost pressure sensor and wanted to reset the ecu. It's more than three days driving since fitted and I don't have the MIL light any more but I'm just curious......the ECCS fuse referred to in page two, mine is labeled EGI. Rating is the same and everything else is the same as in the pictures. What is EGI? Does this also do a reset?
On another note.....since around the time the boost sensor failed, the ambient temp reading on the dash reads 0deg. Is this just a coincidence?
Re: ECU reset on T31 This One CLEARS the Mil light when you know you dont have a problem. I took plug off air intake to change air filter, forgot to refit and started engine. neck minnit-- more like 2 hours. The other fault code post does get you into fault code mode, i just couldn't get in to clear.