hiimkam
X-TRAIL FANATIC
Date Registered: 11-2008
Location: Perth
TOTAL POSTS: 414
|
|
|
|
Re: Power Window Relay
If the power window relay is the same (4 pins, identical to the T30's) and you can locate it, it should work no problems.
the circuit board is positioned in between the factory relay and where the relay plugs into.
if the relay is different, all you would need to do is find out which pins are which and match them up to the circuit board using the info on page 5/6 from kev/nath respectively.
if you ever want to remove it, all you need to do is disconnect the circuit board from the relay, and plug the relay back in!
hope ive helped.
Cam.
--- GT2860rs, Ems stinger, tial external gate, 3" exhaust, 10psi and ~200kw @ all fours. Koya drifteks w/245/50 rubber, 70mm lowered springs, slotted rotors and painted calipers :)
|
20/Mar/2009, 12:34 am
|
|
jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re:
Hi Guys,
Does anyone know if the T31 has some "problem" with the windows? Has anyone tried closing the windows with the key removed from the ignition?
If it is the same problem, I might as well remove the relay I have in the T30 and relocate it to the T31 if it fits and works.
|
14/Apr/2011, 2:00 pm
|
|
cooch t31
X-TRAIL HOLIC
Date Registered: 06-2008
Location: Blue Mountains, NSW
TOTAL POSTS: 5966
|
|
|
|
Re:
The windows won't work if the key is removed.
You have to turn the key to Acc to operate the windows.
--- Tony X-891c
HERE is my D22 Navara
HERE is my old 2008 T31, ST Series1
|
14/Apr/2011, 4:57 pm
|
|
jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re:
Thanks Tony, sounds like the same problem as in no power goes to the windows (delay timer) to allow you to close them after taking the key from the ignition and knowing how many times I do that, it's gonna annoy the hell out of me. Am gonna remove the relay box from the T30 and try on the T31 when I get it.
|
14/Apr/2011, 5:22 pm
|
|
jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re: Power Window Relay
The T31 power window set-up seems a bit more complicated and it includes a Body Control Module (BCM) behind the passenger glovebox as seen below (I couldn't find a relay)
The BCM power supply and terminals are below
The wiring diagram for the T31 RHD models (Series 1 and 2) is below:
I don't think the T30 power window solution would work with the T31 based on the above
Last edited by jalalski, 26/Feb/2012, 6:39 am
|
15/Apr/2011, 7:11 am
|
|
Revhead Kev
Date Registered: 10-2006
Location: Mona Vale, Sydney, AUSTRALIA
TOTAL POSTS: 6360
|
|
|
|
Re: Re:
quote: cooch t31 wrote:
The windows won't work if the key is removed.
You have to turn the key to Acc to operate the windows.
Interesting you say this Tony as the diagram Jalal posted shows only Battery and IGN supplies to the BCM for the windows.
--- Kev X450(c) T30 Guru
03 Titanium Ti T30 Series 1 **MODIFIED**
My Blog
My CarPC Worklog
|
18/Apr/2011, 8:15 am
|
|
cooch t31
X-TRAIL HOLIC
Date Registered: 06-2008
Location: Blue Mountains, NSW
TOTAL POSTS: 5966
|
|
|
|
Re:
There must be something else controlling it Kev as it does as I described, It !@#$ me cause I always forget to put the window up before I turn the key off.
--- Tony X-891c
HERE is my D22 Navara
HERE is my old 2008 T31, ST Series1
|
19/Apr/2011, 6:28 am
|
|
jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re:
Kev,
The diagram shows that IGN must be in ON or START position for the power to reach the BCM and therefore operate the windows. That's how I read the diagram anyway.
|
19/Apr/2011, 8:25 am
|
|