Date Registered: 07-2018 Location: Curitiba TOTAL POSTS:17
Re: Hi All.
I buy a scanner Launch creader VIII and it works in my t31 2009 CVT 4wd. It reads a lot of sensors, ABS, CVT, Steering reset, Air Bag.
During first test return 5 errors in the CVT box.
Most are "past" errors. So I suppose they are old and I dont need to be concern.
Can You guys give opinions about the errors?
I also intend to create a specific post to do all possible tests with this scanner in my petrol t31 2.0 4wd cvt. Good idea?
T31 LE Petrol MR20DE 2.0 4FWD 2009 Black
Re: I think you can just scroll thru the menus and you should find "clear" previous Errors or Codes, something similar to that then just clear them and run the diagnostics again to see if any codes re-appear, if they do, then you still have issues. Normally any mechanic that has a code reader should clear any error codes once they have performed the repairs.
Re: Re:ECU Reader Hi, check the software you are using with your car. Try HobDrive, Econ Tool Scoba, Nissan Gauge or Car Gauge Pro. Those are the ones compatible with the non-OBD T30s. Mine has the same problem, since it is a 2008 model but I think the standard was not mandatory in Latin America.