jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re:
Should have waited to grab my bash plate mate
|
25/Mar/2016, 2:11 pm
|
|
TopGun65
X-TRAIL ENTHUSIAST
Date Registered: 07-2015
TOTAL POSTS: 208
|
|
|
|
Re: T31 bash plates (Full Undercarriage Protection Set)
Hi, I had exactly the same problem with the TJM plate. It caused a vibration throughout the rev range as the lower rear engine mount was resting on the plate. I spaced it out like you did and problem solved. I also bent the front outer edges up so they don't catch on anything. My kit came with an extra 2 U bolts, so I drilled 2 holes in the bash plate and used them rather than the other 2 bolts that came with the kit. The holes are already in the crossmember/ subframe. It's a stronger clamp at the rear that way, and I cut the U bolts down so very little thread is past the nut. (I used locknuts). BTW, I've been waiting 4 weeks now for Dobinsons Springs, out of stock apparently.
Edit, just saw your photo. Use flat washers and locknuts as those nuts can work loose, and use some threaded rod to make the 2 rear U bolts. Just a thought.
Last edited by TopGun65, 25/Mar/2016, 6:59 pm
--- Eric
X-4282 (c)
Glen Alpine, Sydney
2010 T31 Cvt STL
|
25/Mar/2016, 6:06 pm
|
|
jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re:
Hi Axel,
I was planning on selling my front bash plate. Not getting any more of them unfortunately.
|
26/Mar/2016, 4:30 am
|
|
jalalski
Date Registered: 02-2004
Location: SUTHERLAND, SYDNEY
TOTAL POSTS: 29100
|
|
|
|
Re: T31 bash plates (Full Undercarriage Protection Set)
quote: XingTrailKing wrote:
Does anyone have any experience with these bashplates and a T30 Xtrail? I have a 2007 T30 and was wondering if those plates are still available for order and if they would suit said xtrail model. If anyone can help with this enquiry, it would be greatly appreciated. Thanks.
Sorry Jordan but the T30 Bash Plates are discussed in another thread which can be found HERE. Thanks
|
24/Aug/2016, 7:08 pm
|
|