Date Registered: 05-2010 Location: Adelaide TOTAL POSTS:599
Re: Adding a Glovebox Light to a T31 X-Trail Here are some pictures of my installation - as you can see Black may have been better, but it is hardly noticed anyway.
As you can see from the close-up, the unit protrudes a little from the side. This position with this unit is quite sensitive to how far out this protrusion is, as to whether:
1/- Unit switches off when door almost closed
2/- Unit doesn't prevent door from closing.
Get this aspect right and all is good (hence my advice to tape to side in various positions until the correct one is found/remove batteriesto reveal mounting holes/drill 1mm holes and then screw on.
I found this location was one of the only ones that worked without hitting something when closing door.
Date Registered: 10-2010 Location: the GONG TOTAL POSTS:11
Re: Adding a Glovebox Light to a T31 X-Trail love this mod i pretty much did the same thing but used a heller flat mount light, and
the same switch but i put the switch at the front of the g/b.
here are some pics...
below are some picks of my install, hope they help any one concidering this mod.
this is what the top of the box looks like
the veiw into the g/b...... you can see the swich and you can just see the light
here is another angle with the ignition on
Last edited by boodz, 20/Oct/2010, 12:52 pm
--- Bowden A Grace
this is my missus automobile, (that i steal) a 2008 st t31
Date Registered: 05-2011 Location: Melbourne, Vic TOTAL POSTS:13
Re: Hey guys
After reading this one I've had my eyes open for deals, and yesterday I got a 3 pack of black 5 LED velcro/stick on units that run on 3xAAA's which have tilting lenses for $5 at Supercheap Auto. 10 Pack of AAA's and sorted.
I've fitted it on the right hand side where it's recessed a bit and the tilted lens shines into the top bit as well as the bottom, and if the missus drops something in the footwell it comes off as a torch! You have to turn it on and off (two brightness settings) but it's cheap and I didn't have to drill any holes.
When i've read the bit on posting pics again and understand it, I'll try to put one on.
--- 2010 T31 TS series II Flint Grey
Bonnet/Headlamp Protectors, Bug Mesh, Glovebox Light, Reverse Camera/Monitor, Rola Roof Bars.
Date Registered: 02-2004 Location: SUTHERLAND, SYDNEY TOTAL POSTS:29092
Re: Hi Mate,
The links you're including in your posts all require us to sign-up to some board/forum to view these pics, which is not the ideal way of showing us what you want us to see. Please use PhotoBucket and host your images there like everyone else is doing, as I for one, won't be signing-up to any board to view your images!
Also, my Series 4 Ti doesn't have the glovebox light. I just went outside and checked while the car was running and the headlights were on.
I just fitted a stick-on 3 LED gadget in there and it does the job.
Re: Adding a Glovebox Light to a T31 X-Trail Hi All,
Just picked up my new Ti 2.5 CVT today ... woohoo. Tried it on the dirt roads and compared to my traded car in, which was a Holden VE Calais, God it's great.
Now I might be mistaken, but for some reason I had the idea that T31 X-Trails didn't come with a Glove Box Light. So I bought for about $5 a push on/off LED light to stick in the side of the glove box. Pretty damn good lights though.
Well ... I am such an idiot, when I got the car today it has a Glove Box Light. Anyway does anyone know which models didn't have the Glove Box Light?
Also I had the Genuine Nissan Security Alarm fitted, can someone suggest an area of this forum where I can ask some questions re the testing / usage of the alarms?
T31 MY11 (Reg 04-Jan-2012) 2.5 Ti 4x4 Series 4 CVT Precision Grey